b16g101-2：中英文双语版16g101-2
- 图集编号
- b16g101-2
- 图集名称
- 中英文双语版16g101-2
- 定价
- 167.00 元
- 开本
- 16 开
- 主编单位
- 中国建筑标准设计研究院有限公司
内容简介
16g101-2 drawing rules and standard detailing drawings of ichnographic representing method for construction drawings of r.c. structures (cast-in-situ concrete slab-stairs) is the revised version of 11g101-2 drawing rules and standard detailing drawings of ichnographic representing method for construction drawings of r.c. structures (cast-in-situ concrete slab-stairs). according to the updated codes gb 18306-2015 seismic ground motion parameters zonation map of china, gb 50011-2010 code for seismic design of buildings and its partial revision in 2016 and gb 50010-2010 code for design of concrete structures (2015 version) et al., considering feedbacks from engineering practice in recent years, contents in the drawing collection have been systematically revised, and details of cta and ctb stairs with slide bearings, of which the stair slab consists of flight and upper landing slab, are included in this version.
this drawing collection is applicable to cast-in-situ concrete slab-stairs in seismic design with seismic precautionary intensity 6~9.
there are 12 types of cast-in-situ concrete slab-stairs in this drawing collection. among these types, at~gt stairs are applicable to stairs that are not considered in seismic analysis of main structures, and atc stairs are applicable to stairs in frames that are considered in seismic analysis of main structures, while ata, atb, cta and ctb stairs are applicable to stairs where sliding bearings are adopted to reduce the impact of stairs on main structures (frames).
目录
| contents | 1 |
|---|---|
| general instruction | 3 |
| part one drawing rules of ichnographic representing method | |
| 1 general provisions | 4 |
| 2 rules of ichnographic construction drawings of cast-in-situ concrete slab-stairs | 6 |
| 2.1 representing method of ichnographic construction drawings of cast-in-situ concrete slab-stairs | 6 |
| 2.2 types of stairs | 6 |
| 2.3 ichnographic annotation method | 8 |
| 2.4 sectional annotation method | 9 |
| 2.5 tabulated annotation method | 10 |
| 2.6 others | 10 |
| cross-section and supports of at and bt stairs | 11 |
| cross-section and supports of ct and dt stairs | 12 |
| cross-section and supports of et and ft stairs | 13 |
| cross-section and supports of gt stairs | 14 |
| cross-section and supports of ata, atb and atc stairs | 15 |
| cross-section and supports of cta and ctb stairs | 16 |
| part two standard detailing drawings | |
| environment classification for concrete structures minimum concrete cover | 17 |
| basic anchorage length lab, basic anchorage length labe of tension bars in seismic design and the inside diameter of hook d | 18 |
| anchorage length la of tension bars anchorage length lae of tension bars in seismic design | 19 |
| hooks and mechanical anchorage types of longitudinal bars stirrup detailing in the lap zone of longitudinal main bars splice of longitudinal bars | 20 |
| lap lengt ll of longitudinal tension bars | 21 |
| lap length lle of longitudinal tension bars in seismic design | 22 |
| ichnographic annotation method and application of at stairs | 23 |
| reinforcement detailing of at stair slabs | 24 |
| ichnographic annotation method and application of bt stairs | 25 |
| reinforcement detailing of bt stair slabs | 26 |
| ichnographic annotation method and application of ct stairs | 27 |
| reinforcement detailing of ct stair slabs | 28 |
| ichnographic annotation method and application of dt stairs | 29 |
| reinforcement detailing of dt stair slabs | 30 |
| ichnographic annotation method and application of et stairs | 31 |
| reinforcement detailing of et stair slabs | 32 |
| ichnographic annotation method and application of ft stairs | 33 |
| reinforcement detailing of ft stair slabs (section 1-1) | 34 |
| reinforcement detailing of ft stair slabs (section 2-2) | 35 |
| ichnographic annotation method and application of gt stairs | 36 |
| reinforcement detailing of gt stair slabs (section 1-1) | 37 |
| reinforcement detailing of gt stair slabs (section 2-2) | 38 |
| reinforcement detailing of the landing slab of ft and gt stairs (section 3-3 and 4-4) | 39 |
| ichnographic annotation method and application of ata and atb stairs | 40 |
| detailing drawings of slide bearings of ata and cta stairs | 41 |
| reinforcement detailing of ata stair slabs | 42 |
| detailing drawings of slide bearings of atb and ctb stairs | 43 |
| reinforcement detailing of atb stair slabs | 44 |
| ichnographic annotation method and application of atc stairs | 45 |
| reinforcement detailing of atc stair slabs | 46 |
| ichnographic annotation method and application of cta and ctb stairs | 47 |
| reinforcement detailing of cta stair slabs | 48 |
| reinforcement detailing of ctb stair slabs | 49 |
| detailing of increasing and decreasing rise at different risers | 50 |
| connection detailing between the first flight of stairs and foundations | 51 |
| sectional annotation example of construction drawings of at~dt stairs (plan) | 52 |
| sectional annotation example of construction drawings of at~dt stairs (section) | 53 |
| sectional annotation example of construction drawings of ata stairs (plan) | 54 |
| sectional annotation example of construction drawings of ata stairs (section) | 55 |
| sectional annotation example of construction drawings of atb stairs (plan) | 56 |
| sectional annotation example of construction drawings of atb stairs (section) | 57 |
| sectional annotation example i of construction drawings of atc stairs (plan) | 58 |
| sectional annotation example i of construction drawings of atc stairs (section) | 59 |
| sectional annotation example ii of construction drawings of atc stairs (plan) | 60 |
| sectional annotation example ii of construction drawings of atc stairs (section) | 61 |
| sectional annotation example of construction drawings of cta stairs (plan) | 62 |
| sectional annotation example of construction drawings of cta stairs (section) | 63 |
| sectional annotation example of construction drawings of ctb stairs (plan) | 64 |
| sectional annotation example of construction drawings of ctb stairs (section) | 65 |
